spl tips for camaro

[camaroaudio69 10+ year member]

you realize that your going to have to put $1000-2000 into batteries ect...?

no i didnt realize it would be that much

 

[camaroaudio69 10+ year member]

just give me a list of what all you think i will need to get into the 149-150 range

 

[CantGetEnufBASS 10+ year member]

3000 watts is a alot of power man, cost money to go big

and from the way it looks you dont got the dough/know how, to get half the equipment you need

so consider this thread

/closed

 

[skmfkr 5,000+ posts]

those amps and subs you have you can def get to your goal of high 140s. im not familar with the camaro tho, but if u can somehow fit a box thats 6-7cubes tuned to high 30s, and keep your voltage drop to only about 13v, which i think a d3100 in the rear and d3400/d2400 under ur hood should def do. ive got a d5100r and d3400 with about 2kw and my voltage doesnt drop under 13.3

 

[camaroaudio69 10+ year member]

i got plenty money to get whatever i need trust me i just didnt realize it would cost 2000 for electrical supplies i have friends around here runnin 4 amps and they havent spend nearly that type of money

 

[Gearstix 10+ year member]

I don't think those Crunch amps put out 1500W...

 

[camaroaudio69 10+ year member]

nah but they put out close to 1000 which is enough

 

[DavaFlava 10+ year member]

Those crunch amps will do 800 rms at the most. Solid little amps though

 

[camaroaudio69 10+ year member]

which way would be the best to build my box subs forward and port up or both subs an port upward also any other little tips to gain small numbers would be helpful

 

[Compjake 10+ year member]

you realize that your going to have to put $1000-2000 into batteries ect...?

BS, my brother runs 2000RMS off a Soundstream amp to 3 RE MX 12's and got 149.9db with his stock 90 amp alt (I think its 90) and a wal-mart battery... although he has a 50 farad sound stream cap //content.invisioncic.com/y282845/emoticons/wow.gif.23d729408e9177caa2a0ed6a2ba6588e.gif:wow:

 

[ThatChevyGuy 5,000+ posts]

pzi 1500 = 120 amps of fusing=1000watts.

 

[stevew007 10+ year member]

you realize that your going to have to put $1000-2000 into batteries ect...?

^^^//content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif^^^ i've ran 2 saz3000's @ .5 each on a single nsb-90 for burps and music. you could spend $200 on a couple of cheaper batts and be good.most people i know dont drive around at full volume all the time! I think you can hit your mark it will just take some new box designs. i've only seen 2 camaros with systems one had a wall with 2 15's and 2k the other had 2 12's in back firing at the glass and 2 12's firing forward behind the seats with 8k (very bad design) sad thing the guy with a wall stomped all over the other camaro but neither did good number's. both did mid 40's on the AC (white wand)

 

[Ellsworthz 10+ year member]

a guy one here did a 144 with 2 re se 12"s sealed in a small box in the well. he had a aq2200 and 1 big batt in the back.

are you taking out the whole back seat? thats just stupid.

 

[Pyro_By_Nature 5,000+ posts]

you realize that your going to have to put $1000-2000 into batteries ect...?

//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif