Reply to thread

Message

<blockquote data-quote="Pyromaniac4food" data-source="post: 8433177" data-attributes="member: 656145">Correct.This beast is rated at 12.6v guys plenty of power to go around!From the site:• Maximum power (*) = 5KW• Frequency response = 5Hz to 20kHz• Input sensitivity = 0.5V to 6V• High Pass Filter = 5 Hz to 1 kHz• Low Pass Filter 50Hz to 20KHz =• Supply Voltage (**) = 12,6V (10V to 16V)• FA Dumping Factor = 100 @ 1Ω - 200 @ 2Ω• Total harmonic distortion =• Consumption at rest = 2.5A• Maximum consumption (resistive load) = 500A• Maximum consumption ( music signal) = 400A• Installation SMD = Yes• Weight (kg) (***) = 6 kg• Length = 354mm• Width = 270 mm• Height = 73mm• Versions (****) = 1Ω and 2Ω• Power to Double impedance specified = 4KW(*) Power in Watts RMS with stable supply voltage 12,6V.(**) Voltage 14.4V above should be applied only in competitive character(***) Weight with packing and rounding freight calculation purposes .(****) Check the impedance in the pasted identification label on the amplifier.</blockquote>

[QUOTE="Pyromaniac4food, post: 8433177, member: 656145"] Correct. This beast is rated at 12.6v guys plenty of power to go around! From the site: • Maximum power (*) = 5KW • Frequency response = 5Hz to 20kHz • Input sensitivity = 0.5V to 6V • High Pass Filter = 5 Hz to 1 kHz • Low Pass Filter 50Hz to 20KHz = • Supply Voltage (**) = 12,6V (10V to 16V) • FA Dumping Factor = 100 @ 1Ω - 200 @ 2Ω • Total harmonic distortion = • Consumption at rest = 2.5A • Maximum consumption (resistive load) = 500A • Maximum consumption ( music signal) = 400A • Installation SMD = Yes • Weight (kg) (***) = 6 kg • Length = 354mm • Width = 270 mm • Height = 73mm • Versions (****) = 1Ω and 2Ω • Power to Double impedance specified = 4KW (*) Power in Watts RMS with stable supply voltage 12,6V. (**) Voltage 14.4V above should be applied only in competitive character (***) Weight with packing and rounding freight calculation purposes . (****) Check the impedance in the pasted identification label on the amplifier. [/QUOTE]

Verification