Reply to thread

Message

<blockquote data-quote="tcguy85" data-source="post: 5037330" data-attributes="member: 574289">try swapping the phase of each tweeter one at a time and see if it helps. making a cd with pink noise on it should make the difference more obvious and easier to tell which way is right or more desirable to you.if phase doesn&#039;t help try the EQ. the problem area for you could be as low as 1k or even 800hz. i know i personally could take loud cymbals all day long but certain guitar notes could make me wanna shoot myself.try to listen carefully and see what instruments are really bothering you and use this interactive graph to try to pinpoint things a little more.<a href="http://www.independentrecording.net/irn/resources/freqchart/main_display.htm" target="_blank">http://www.independentrecording.net/irn/resources/freqchart/main_display.htm</a>for example, if its the guitar thats bothering you, then messing with anything 5k or above won&#039;t help. if it is the shimmer of the cymbals then your problem area is around 7k and higher, figuring it out is the 1st half of the battle. 2nd half is figuring out how to fix it.i recently had a problem where i just couldn&#039;t tame my upper mid-range no matter what i did, the solution was to move my tweeters. so don&#039;t rule out speaker position as the cause. speaker placement and aiming has the BIGGEST affect on sound, next would be crossover points/slopes, and then phasing.</blockquote>

[QUOTE="tcguy85, post: 5037330, member: 574289"] try swapping the phase of each tweeter one at a time and see if it helps. making a cd with pink noise on it should make the difference more obvious and easier to tell which way is right or more desirable to you. if phase doesn't help try the EQ. the problem area for you could be as low as 1k or even 800hz. i know i personally could take loud cymbals all day long but certain guitar notes could make me wanna shoot myself. try to listen carefully and see what instruments are really bothering you and use this interactive graph to try to pinpoint things a little more. [URL="http://www.independentrecording.net/irn/resources/freqchart/main_display.htm"]http://www.independentrecording.net/irn/resources/freqchart/main_display.htm[/URL] for example, if its the guitar thats bothering you, then messing with anything 5k or above won't help. if it is the shimmer of the cymbals then your problem area is around 7k and higher, figuring it out is the 1st half of the battle. 2nd half is figuring out how to fix it. i recently had a problem where i just couldn't tame my upper mid-range no matter what i did, the solution was to move my tweeters. so don't rule out speaker position as the cause. speaker placement and aiming has the BIGGEST affect on sound, next would be crossover points/slopes, and then phasing. [/QUOTE]

Verification