Reply to thread

Message: <blockquote data-quote="ledvedder" data-source="post: 7919015" data-attributes="member: 645518"><p>If you look at page 9 of the manual, <a href="http://www.clarion.com/us/en/MungoBlobs/106/777/CZ702_EN.pdf," target="_blank">http://www.clarion.com/us/en/MungoBlobs/106/777/CZ702_EN.pdf,</a> 2 way mode was the closest to my speaker setup (rear, front door, dash).  The other 2 modes (normal and 3 way) have subs.  The different modes have settings that apply automatically to all the filters.  It had the high HPF set at 2K.  As I changed that setting, finally setting it to passthrough, it brought the bass back into the rear speakers.  I found that a bit odd.  I double checked both the balance and fader to make sure all the speakers were wired correctly, and they are.  Now, I'm also wondering if the time alignment settings aren't affecting the correct speakers, since the filters seem to be on the wrong speakers.</p></blockquote><p></p>

Top