Reply to thread

Message

<blockquote data-quote="huth04" data-source="post: 33293" data-attributes="member: 542465">I want to know if this setup will work, sound good, ect.?Ok the sub i want to hook up is a Kicker Solobaric DVC S8L5.&nbsp; This sub is a 4 ohm subSpecs:copolymer coneSantoprene rubber surroundfrequency response 28-100 Hzpower range 75-300 watts RMS (150 watts per coil)peak power handling 600 wattssensitivity 83.9 dB SPLtop-mount depth 4-11/16&quot;sealed box volume 0.33-0.75 cubic feet25 watts RMS/50 peak x 4 channelsported box volume 1.75-3.25 cubic feetthe amp is a JBL 600.1 ampspecs:- Output 4 Ohms: 300W x 1- Output 2 Ohms: 600W x 1- Signal-to-Noise (dBA): &amp;gt;100- Frequency Response (±3dB): 20Hz - 500Hz- Total Harmonic Distortion: 0.1%- Input Sensitivity: 250mV - 4V</blockquote>

[QUOTE="huth04, post: 33293, member: 542465"] I want to know if this setup will work, sound good, ect.? Ok the sub i want to hook up is a Kicker Solobaric DVC S8L5. This sub is a 4 ohm sub Specs: copolymer cone Santoprene rubber surround frequency response 28-100 Hz power range 75-300 watts RMS (150 watts per coil) peak power handling 600 watts sensitivity 83.9 dB SPL top-mount depth 4-11/16" sealed box volume 0.33-0.75 cubic feet 25 watts RMS/50 peak x 4 channels ported box volume 1.75-3.25 cubic feet the amp is a JBL 600.1 amp specs: - Output 4 Ohms: 300W x 1 - Output 2 Ohms: 600W x 1 - Signal-to-Noise (dBA): >100 - Frequency Response (±3dB): 20Hz - 500Hz - Total Harmonic Distortion: 0.1% - Input Sensitivity: 250mV - 4V [/QUOTE]

Verification