Reply to thread

Message

<blockquote data-quote="knotslck" data-source="post: 1447313" data-attributes="member: 561694">i am trying to figure out what dims. to build my box. it is for 2 15in kicker cvr15s. the kicker specs are a min. of 3.0 cuft. a peice. i want to tune them to about 35hz. the problem is my max dims. are 15in tall, 35in. wide and 30in. long. would it be the best to build a single or dual chambered box in this situation? would it hurt to build&nbsp; a single chambered box to about 5cuft. net volume giving them about 2.5 cuft a peice (is it ok to give them less volume than what kicker say)?im also having problems of which way to fire the ports and where to put the woofers. i have about 3 inches of clearence on the top. none on the back. 5 or so inches on one part of the side panel and 5 or so inches on the front of the box facing the backseat. would it be best to just fire the port and the woofer to the backseat or what?so pretty much i just need to know. 1 chamber or 2? which way to fire ports and woofers for best results and is it ok to give them less that required volume?thanks for any help.</blockquote>

[QUOTE="knotslck, post: 1447313, member: 561694"] i am trying to figure out what dims. to build my box. it is for 2 15in kicker cvr15s. the kicker specs are a min. of 3.0 cuft. a peice. i want to tune them to about 35hz. the problem is my max dims. are 15in tall, 35in. wide and 30in. long. would it be the best to build a single or dual chambered box in this situation? would it hurt to build a single chambered box to about 5cuft. net volume giving them about 2.5 cuft a peice (is it ok to give them less volume than what kicker say)? im also having problems of which way to fire the ports and where to put the woofers. i have about 3 inches of clearence on the top. none on the back. 5 or so inches on one part of the side panel and 5 or so inches on the front of the box facing the backseat. would it be best to just fire the port and the woofer to the backseat or what? so pretty much i just need to know. 1 chamber or 2? which way to fire ports and woofers for best results and is it ok to give them less that required volume? thanks for any help. [/QUOTE]

Verification