Reply to thread

Message

<blockquote data-quote="DonH" data-source="post: 7495405" data-attributes="member: 594322">4 will come eventually. i would like to have a killer loud front stage first thou //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif that way i just throw a new box in another ap1800 and call it a day //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gifand it will be active. so full range signal from ym hu into a electronic crossover, then front/high into the front 2 channel on my 2ch amp set to full on the eq for those two channels. then the rear/mid rca to the last two channel inputs on ym 4ch amp with the eq set to bandpass. the electronic eq does all the eq-ing to my preferences. now as far as wiring the speakers, the mids and tweeters, the three mids per door will be wired in parallel for a 2.67ohm load per side. then the tweeters will be wired in parallel per pillar for a 4ohm load. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif so approx 60rms per mid and 55rms per tweeter. should scream!</blockquote>

[QUOTE="DonH, post: 7495405, member: 594322"] 4 will come eventually. i would like to have a killer loud front stage first thou [IMG]//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif[/IMG] that way i just throw a new box in another ap1800 and call it a day [IMG]//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif[/IMG] and it will be active. so full range signal from ym hu into a electronic crossover, then front/high into the front 2 channel on my 2ch amp set to full on the eq for those two channels. then the rear/mid rca to the last two channel inputs on ym 4ch amp with the eq set to bandpass. the electronic eq does all the eq-ing to my preferences. now as far as wiring the speakers, the mids and tweeters, the three mids per door will be wired in parallel for a 2.67ohm load per side. then the tweeters will be wired in parallel per pillar for a 4ohm load. [IMG]//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif[/IMG] so approx 60rms per mid and 55rms per tweeter. should scream! [/QUOTE]

Verification