snailshell and rearhorn

[knightofcolmbus]

does anyone know how to make a rearhorn a snailshell box?

Click to read more...

 

[bonesninja 5,000+ posts]

here's a snailshell kinda. for a 15" woofer 17" height on the box welcome to ca.com

 

[ruckus]

umm if that rear wall before the port is 11 1/2" wide like it says then thats not a box for a 15" sub, more like a 12" sub

 

[chinny 5,000+ posts]

umm if that rear wall before the port is 11 1/2" wide like it says then thats not a box for a 15" sub //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif more like a 10" sub

thats how it is, its been done before for the XXX15 and its worked.

 

[ruckus]

that would put the speaker over the ^ it has clearance?

 

[JnEsPappa 10+ year member]

The drawing is not to scale apparently, so it just might be correct. Look at the 7" wide port...it is out of scale.

 

[ruckus]

The drawing is not to scale apparently, so it just might be correct. Look at the 7" wide port...it is out of scale.

I realize its not to scale but if you look at the left side has 1 1/2" before the speaker starts and the straight part of the wall behind it is 11 1/2" that leaves 10" before the ^ which puts the magnet over the ^ which is you ever seen a xxx doesnt look like it will clear to me. a xxx is a deep ****er.

 

[vasilios 10+ year member]

my xxx15 fits like a glove, man..same exact measurements as the above plan-sheet.

 

[jellyfish420 10+ year member]

I realize its not to scale but if you look at the left side has 1 1/2" before the speaker starts and the straight part of the wall behind it is 11 1/2" that leaves 10" before the ^ which puts the magnet over the ^ which is you ever seen a xxx doesnt look like it will clear to me. a xxx is a deep ****er.

look half way down the page...http://forums.caraudio.com/vb/showthread.php?t=103089&page=2&highlight=snailshell