Reply to thread

Message

<blockquote data-quote="SPLluminator" data-source="post: 5859379" data-attributes="member: 602719">Ok, well ive tryed with two HDC3&#039;s but im not getting very good #&#039;s due to the fact that i have only one 20.1 powering them at 1 ohm.&nbsp; I was wondering what you guys thought of a single 10&quot; HDC3 with the 20.1 at .5ohm.&nbsp; I was thinking like .75-1 cubic ft @ ~50hz for burps.&nbsp; I need something small because of the power the amp will put out.&nbsp; I realize its too much power for daily, but for burps i would expect this lil monster to hold up for a while.&nbsp; This is just for ideas.&nbsp; Also, what about a kerfed port.&nbsp; I saw Sundownz was getting some luck with his 15 and a kerfed port.&nbsp; Another thought of mine was a aero port with a loading chamber.&nbsp; Just a thought, idk how it would do for spl.&nbsp; Thanks for any suggestions or help.O btw, i have a Lumina.&nbsp; I was gonna try a bunch of different things.&nbsp; Whether its trunk sealed off, or sub up port back or sub forward port back and so on.</blockquote>

[QUOTE="SPLluminator, post: 5859379, member: 602719"] Ok, well ive tryed with two HDC3's but im not getting very good #'s due to the fact that i have only one 20.1 powering them at 1 ohm. I was wondering what you guys thought of a single 10" HDC3 with the 20.1 at .5ohm. I was thinking like .75-1 cubic ft @ ~50hz for burps. I need something small because of the power the amp will put out. I realize its too much power for daily, but for burps i would expect this lil monster to hold up for a while. This is just for ideas. Also, what about a kerfed port. I saw Sundownz was getting some luck with his 15 and a kerfed port. Another thought of mine was a aero port with a loading chamber. Just a thought, idk how it would do for spl. Thanks for any suggestions or help. O btw, i have a Lumina. I was gonna try a bunch of different things. Whether its trunk sealed off, or sub up port back or sub forward port back and so on. [/QUOTE]

Verification