Reply to thread

Message

<blockquote data-quote="Youhearthat?" data-source="post: 1205445" data-attributes="member: 563353">Ok my currently just finished install goes like this...On Accord 2004 V6 CoupeEclipse 8445 HeadunitJL audio E6450 AMP Six channelFront Set of Boston Pro&#039;s 60Rear Set of focal 5.25 Mids for rear fillDiamond audio 400w RMS sealed 10&quot; DVC SubSo on channel 1 and 2 I have the Boston Pro&#039;s, 3 and 4 Rear fill Focal&#039;s, and 5 and 6 Bridged sub at 8hms.This are my amp specs:JL Audio Amplifier&quot;e&quot; Series Technologies&nbsp; &nbsp;&nbsp; Tutorials&nbsp; &nbsp;&nbsp; ReviewsJL Audio Amplifiere6450 Class A/B Six-Channel System Amplifier Features:e6450Description:&nbsp; &nbsp;&nbsp; Class A/B Six-Channel System AmplifierPatented Technology:&nbsp; &nbsp;&nbsp; Absolute Symmetry™ Class A/B Circuit (U.S. Patent #6,294,959)Differential, Noise-Cancelling Input Topology:&nbsp; &nbsp;&nbsp; RCA jack inputs (low-level) and multi-pin jack (high-level)On-board Crossover:&nbsp; &nbsp;&nbsp; State-variable, 12dB / octave Butterworth with continuously variable cutoff frequency selection from 50 – 200 Hz. Configurable as Low-Pass or High-PassBass EQ (Channels 5&amp;amp;6 only):&nbsp; &nbsp;&nbsp; +6 dB fixed frequency, fixed &#039;Q&#039; (defeatable) with port for optional remote bass control (RBC-1)Speaker output connections:&nbsp; &nbsp;&nbsp; Accept up to 8 AWG wire+12V and Ground connections:&nbsp; &nbsp;&nbsp; Accept up to 4 AWG wireClick here to download the owner&#039;s manual (PDF).JL Audio Amplifiere6450 Class A/B Six-Channel System Amplifier Specifications:Rated Power 12.5 V Stereo:&nbsp; &nbsp;&nbsp; 45W RMS x 6 @ 4 ohm75W RMS x 6 @ 2 ohmRated Power 12.5 V Bridged:&nbsp; &nbsp;&nbsp; 90W RMS x 3 @ 8 ohm150W RMS x 3 @ 4 ohmRated Power 14.5 V Stereo:&nbsp; &nbsp; &nbsp; 70 W RMS x 6 @ 4 ohm110 W RMS x 6 @ 2 ohmRated Power 14.5 V Bridged :&nbsp; &nbsp;&nbsp; 140 W RMS x 3 @ 8 ohm220 W RMS x 3 @ 4 ohmSo I want to bridge the comps in channels 1 trough 4 and leave 5 and 6 for rear fill and get a separate amp for my sub, especifically a rockford fosgate punch 3002.Specs for the amp:75 W x 2 @ 4 Ohms RMS150 W x 2 @ 2 Ohms RMS300 W x 1 @ 4 Ohms Bridged RMSI could also get anything from PPI, Crossfire, JBL, Memphis, MA audio, JL audio, Diamond.So any other amp recommendations?You think is worth it?what benefits should I see?Could I kill my alternator by doing this or put more strain on my electrical system?I just like quiet crystal clear music not something loud that bumps all of my car parts... just nice clean SQ.Thanx in advance..!</blockquote>

[QUOTE="Youhearthat?, post: 1205445, member: 563353"] Ok my currently just finished install goes like this... On Accord 2004 V6 Coupe Eclipse 8445 Headunit JL audio E6450 AMP Six channel Front Set of Boston Pro's 60 Rear Set of focal 5.25 Mids for rear fill Diamond audio 400w RMS sealed 10" DVC Sub So on channel 1 and 2 I have the Boston Pro's, 3 and 4 Rear fill Focal's, and 5 and 6 Bridged sub at 8hms. This are my amp specs: JL Audio Amplifier "e" Series Technologies Tutorials Reviews JL Audio Amplifier e6450 Class A/B Six-Channel System Amplifier Features: e6450 Description: Class A/B Six-Channel System Amplifier Patented Technology: Absolute Symmetry™ Class A/B Circuit (U.S. Patent #6,294,959) Differential, Noise-Cancelling Input Topology: RCA jack inputs (low-level) and multi-pin jack (high-level) On-board Crossover: State-variable, 12dB / octave Butterworth with continuously variable cutoff frequency selection from 50 – 200 Hz. Configurable as Low-Pass or High-Pass Bass EQ (Channels 5&6 only): +6 dB fixed frequency, fixed 'Q' (defeatable) with port for optional remote bass control (RBC-1) Speaker output connections: Accept up to 8 AWG wire +12V and Ground connections: Accept up to 4 AWG wire Click here to download the owner's manual (PDF). JL Audio Amplifier e6450 Class A/B Six-Channel System Amplifier Specifications: Rated Power 12.5 V Stereo: 45W RMS x 6 @ 4 ohm 75W RMS x 6 @ 2 ohm Rated Power 12.5 V Bridged: 90W RMS x 3 @ 8 ohm 150W RMS x 3 @ 4 ohm Rated Power 14.5 V Stereo: 70 W RMS x 6 @ 4 ohm 110 W RMS x 6 @ 2 ohm Rated Power 14.5 V Bridged : 140 W RMS x 3 @ 8 ohm 220 W RMS x 3 @ 4 ohm So I want to bridge the comps in channels 1 trough 4 and leave 5 and 6 for rear fill and get a separate amp for my sub, especifically a rockford fosgate punch 3002. Specs for the amp: 75 W x 2 @ 4 Ohms RMS 150 W x 2 @ 2 Ohms RMS 300 W x 1 @ 4 Ohms Bridged RMS I could also get anything from PPI, Crossfire, JBL, Memphis, MA audio, JL audio, Diamond. So any other amp recommendations? You think is worth it? what benefits should I see? Could I kill my alternator by doing this or put more strain on my electrical system? I just like quiet crystal clear music not something loud that bumps all of my car parts... just nice clean SQ. Thanx in advance..! [/QUOTE]

Verification