Reply to thread

Message

<blockquote data-quote="AnthonyO" data-source="post: 8888026" data-attributes="member: 563887"><p>Does anyone know anything about BlackBrick subs?</p><p>[URL unfurl=&quot;true&quot;]https://blackbrickaudio.com/products/slim-shady-10-shallow-subwoofer[/URL]</p><table style='width: 100%'><tr><td>Basket</td><td>Black Stamped</td></tr><tr><td>Cone</td><td>Non-Pressed Paper</td></tr><tr><td>Surround</td><td>Rubber</td></tr><tr><td>Coil</td><td>2-Layer, 2&quot; Flat Copper Heat Coil</td></tr><tr><td>Spider</td><td>Tinsel Weave Leads on Red NOMEX</td></tr><tr><td>Motor</td><td>40oz</td></tr><tr><td>OHM</td><td>Dual 4ohm</td></tr><tr><td>RMS</td><td>300w RMS</td></tr><tr><td>Peak</td><td>600w MAX</td></tr><tr><td>XMAX</td><td>17mm peak-to-peak</td></tr><tr><td>QTS</td><td>0.69 QTS</td></tr><tr><td>OMS</td><td>5.68 OMS</td></tr><tr><td>QES</td><td>0.79 QES</td></tr><tr><td>FS</td><td>44.1 Hz</td></tr><tr><td>BL</td><td>13.3</td></tr><tr><td>Freq Response</td><td>44 Hz - 500Hz</td></tr><tr><td>Sensitivity</td><td>86 dB</td></tr><tr><td>Net Weight</td><td>7.6 lbs</td></tr></table><p></p><p></p><p><strong>Custom Box Specifications</strong></p><p></p><table style='width: 100%'><tr><td>Recommended Ported Volume</td><td>0.74 - 1.16 ft 3</td></tr><tr><td>Recommended Sealed Volume</td><td>0.53 - 0.88&nbsp; &nbsp;&nbsp; ft 3</td></tr><tr><td>Tuning</td><td>44.1 Hz</td></tr><tr><td>Port Area</td><td>16 square inches per cubic foot</td></tr><tr><td>Cutout Diameter</td><td>9.06&quot;</td></tr><tr><td>Mounting Depth</td><td>3.07&quot;</td></tr><tr><td>Magnet Diameter</td><td>7.8&quot;</td></tr><tr><td>Total Height</td><td>4.1&quot;</td></tr><tr><td>Total Outside Diameter</td><td>10.23&quot;</td></tr><tr><td>Motor Depth</td><td>1.5&quot;</td></tr></table></blockquote><p></p>

[QUOTE="AnthonyO, post: 8888026, member: 563887"] Does anyone know anything about BlackBrick subs? [URL unfurl="true"]https://blackbrickaudio.com/products/slim-shady-10-shallow-subwoofer[/URL] [TABLE] [TR] [TD]Basket[/TD] [TD]Black Stamped[/TD] [/TR] [TR] [TD]Cone[/TD] [TD]Non-Pressed Paper[/TD] [/TR] [TR] [TD]Surround[/TD] [TD]Rubber[/TD] [/TR] [TR] [TD]Coil[/TD] [TD]2-Layer, 2" Flat Copper Heat Coil[/TD] [/TR] [TR] [TD]Spider[/TD] [TD]Tinsel Weave Leads on Red NOMEX[/TD] [/TR] [TR] [TD]Motor[/TD] [TD]40oz[/TD] [/TR] [TR] [TD]OHM[/TD] [TD]Dual 4ohm[/TD] [/TR] [TR] [TD]RMS[/TD] [TD]300w RMS[/TD] [/TR] [TR] [TD]Peak[/TD] [TD]600w MAX[/TD] [/TR] [TR] [TD]XMAX[/TD] [TD]17mm peak-to-peak[/TD] [/TR] [TR] [TD]QTS[/TD] [TD]0.69 QTS[/TD] [/TR] [TR] [TD]OMS[/TD] [TD]5.68 OMS[/TD] [/TR] [TR] [TD]QES[/TD] [TD]0.79 QES[/TD] [/TR] [TR] [TD]FS[/TD] [TD]44.1 Hz[/TD] [/TR] [TR] [TD]BL[/TD] [TD]13.3[/TD] [/TR] [TR] [TD]Freq Response[/TD] [TD]44 Hz - 500Hz[/TD] [/TR] [TR] [TD]Sensitivity[/TD] [TD]86 dB[/TD] [/TR] [TR] [TD]Net Weight[/TD] [TD]7.6 lbs[/TD] [/TR] [/TABLE] [B]Custom Box Specifications[/B] [TABLE] [TR] [TD]Recommended Ported Volume[/TD] [TD]0.74 - 1.16 ft 3[/TD] [/TR] [TR] [TD]Recommended Sealed Volume[/TD] [TD]0.53 - 0.88 ft 3[/TD] [/TR] [TR] [TD]Tuning[/TD] [TD]44.1 Hz[/TD] [/TR] [TR] [TD]Port Area[/TD] [TD]16 square inches per cubic foot[/TD] [/TR] [TR] [TD]Cutout Diameter[/TD] [TD]9.06"[/TD] [/TR] [TR] [TD]Mounting Depth[/TD] [TD]3.07"[/TD] [/TR] [TR] [TD]Magnet Diameter[/TD] [TD]7.8"[/TD] [/TR] [TR] [TD]Total Height[/TD] [TD]4.1"[/TD] [/TR] [TR] [TD]Total Outside Diameter[/TD] [TD]10.23"[/TD] [/TR] [TR] [TD]Motor Depth[/TD] [TD]1.5"[/TD] [/TR] [/TABLE] [/QUOTE]

Verification