Reply to thread

Message: <blockquote data-quote="big_way32" data-source="post: 6509893" data-attributes="member: 607130"><p>Ok, I Have the Pioneer AVH-P5000 HU, an AQ-2200 amp, and 2 Fi Q 15s that are in a 5.5 cu.ft ported enclosure after all displacement that is tuned to 35 Hz. The HU has a RAC output of 4 Volts so i match that voltage as close as possible (3.9V). I tuned my enclosure to 35Hz so my Subsonic level is set to 30Hz. I know that the gain is the most important setting to any amp, followed by the Subsonic filter if you have a ported enclosure. Now am trying to find out how to set my Bass Boost and Low Pass Filter. I looked through the forum found info on the Gain and Subsonic filter but couldnt find anything on the BB or LPF. Are they just set by ear or do they have parameters. Can you guys help me please or send me to a link with the info.? Thanks in advance.</p></blockquote><p></p>

Top