Reply to thread

Message

<blockquote data-quote="zjsager1" data-source="post: 8918520" data-attributes="member: 694381">Hi all! I&#039;m new here to this forum but I&#039;ve put together this SQ audio build through tons of hours and hard work. I&#039;m curious on general opinion of the speakers I have installed and general tuning advice to get the most out of them. Specifically a description of the fosgates for the rears on SQ because I know nothing about them, a friend sold them to me for $80.Fronts : JL C2 650Rears: Rockford Fosgate T1650 (installing soon)Sub: Rockford Fosgate P3D2 - 10 (Sound Ordanace Box)Amps: Kicker KEY 200.4 (Fronts/Rears), Kicker CXA800.1 (Sub, yes a bit over powered for the sub)Oh yeah, this system is installed in my 2016 Mazda 3 Hatchback using a LC7i for the LOC from the stock head unit. I also used some 80mil KILMAT in the front doors, will also put in trunk and rear doors because it rattles like crazy. Fast rings as well on speakers with foam tape.</blockquote>

[QUOTE="zjsager1, post: 8918520, member: 694381"] Hi all! I'm new here to this forum but I've put together this SQ audio build through tons of hours and hard work. I'm curious on general opinion of the speakers I have installed and general tuning advice to get the most out of them. Specifically a description of the fosgates for the rears on SQ because I know nothing about them, a friend sold them to me for $80. Fronts : JL C2 650 Rears: Rockford Fosgate T1650 (installing soon) Sub: Rockford Fosgate P3D2 - 10 (Sound Ordanace Box) Amps: Kicker KEY 200.4 (Fronts/Rears), Kicker CXA800.1 (Sub, yes a bit over powered for the sub) Oh yeah, this system is installed in my 2016 Mazda 3 Hatchback using a LC7i for the LOC from the stock head unit. I also used some 80mil KILMAT in the front doors, will also put in trunk and rear doors because it rattles like crazy. Fast rings as well on speakers with foam tape. [/QUOTE]

Verification