Seas Reference vs Dynaudio 2-way

[kreukishot 10+ year member]

I'm looking at the Seas and the Dynaudio 2 way components. I listen to a lot of different types of music from hip hop and trance to sometimes classical so I'm looking to get something that has a nice range. Which would you guys recommend?

Also what kind of power should I be running to them? I've been looking at the Arc Audio Amps and was wondering if I should get something like the 4050xxk and power up my rear fills /w the components or get the 2100xxk and power up the components with them and run the rears off my HU?

Thanks in advance //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Click to read more...

 

[Colin+M 10+ year member]

I wouldn't waste amp power on the rears, but you could get a 4 channel and biamp the References.

 

[azbass 5,000+ posts]

i have dynaudio. they sound amazing, i dont have any experence with seas tho

 

[Colin+M 10+ year member]

Yeah, my SEAS Lotus Reference set is arriving Friday I don't think you could go wrong with either set.

 

[GSteg 10+ year member]

which dynaudio 2-way and Seas are we talking about?

 

[Colin+M 10+ year member]

I think he's talking about the Seas Lotus Reference, at least I am.

 

[3.5Max6spd 10+ year member]

Hes likely refering to the System 240mkII's...Dyns like alot more power than a 4050 or 2100 could supply to optimally drive them IMO, unless you bridge the 4050 then you are in business and can get that mw160 to pound out the midbass. The Seas however should be ok with a biamp of just plain 100+rms perside, they get fairly loud and perform well with less power than the Dyn's....