Reply to thread

Message

<blockquote data-quote="The Camry" data-source="post: 8522225" data-attributes="member: 657974"><img src="http://uploads.tapatalk-cdn.com/20160914/9879e5bd7df6ce8e7994818c1a956ef0.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://uploads.tapatalk-cdn.com/20160914/d81690b91b7c50470ac5057bd43378ca.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://uploads.tapatalk-cdn.com/20160914/65226410cb987f0ebb1bc870b05eca8c.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://uploads.tapatalk-cdn.com/20160914/bbd745f8e7f6d0168ce5576e0be245a2.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />So essentially what I did was push the box as far forward as I could. Then took cardboard and cut out designs till I had most of the free space taken up by cardboard shapes. I transferred those to wood, carpeted them and mounted them to the box or wherever I could to make them solid. The top part was the big issue as the trunk is curved and the torsion bars get in the way of everything.&nbsp; I took a 1/2in mdf board and cut it the width of the box and the length of the distance between the box and trunk face. Pushed that forward and ontop of the box. Its held there be pure pressure.I got underneath it and paint taped everything between that piece and the trunk hole. Then I used some expanding foam to fill in that top area. It should only bind to the wood so itll be removable.&nbsp; This also stops those pesky torque bars from rattling from bass notes.Sent from my SGH-T999 using Tapatalk</blockquote>

[QUOTE="The Camry, post: 8522225, member: 657974"] [IMG]http://uploads.tapatalk-cdn.com/20160914/9879e5bd7df6ce8e7994818c1a956ef0.jpg[/IMG] [IMG]http://uploads.tapatalk-cdn.com/20160914/d81690b91b7c50470ac5057bd43378ca.jpg[/IMG] [IMG]http://uploads.tapatalk-cdn.com/20160914/65226410cb987f0ebb1bc870b05eca8c.jpg[/IMG] [IMG]http://uploads.tapatalk-cdn.com/20160914/bbd745f8e7f6d0168ce5576e0be245a2.jpg[/IMG] So essentially what I did was push the box as far forward as I could. Then took cardboard and cut out designs till I had most of the free space taken up by cardboard shapes. I transferred those to wood, carpeted them and mounted them to the box or wherever I could to make them solid. The top part was the big issue as the trunk is curved and the torsion bars get in the way of everything. I took a 1/2in mdf board and cut it the width of the box and the length of the distance between the box and trunk face. Pushed that forward and ontop of the box. Its held there be pure pressure. I got underneath it and paint taped everything between that piece and the trunk hole. Then I used some expanding foam to fill in that top area. It should only bind to the wood so itll be removable. This also stops those pesky torque bars from rattling from bass notes. Sent from my SGH-T999 using Tapatalk [/QUOTE]

Verification