Reply to thread

Message

<blockquote data-quote="rickymac21" data-source="post: 6786782" data-attributes="member: 604748">I already have a good idea of how to do so but here is some info on it first..The system is going gonna be a bass racer... All the equipment is in my sig.... 2 quad 1.2 ohm soundstream xxx 15&#039;s on a pair of soundstream DTR1.3400d&#039;s . . . An Iraggi 260 amp alt, red top under the hood and 2 kinetik 2400&#039;s in the back. 2 runs of power and 2 runs of ground (0 gauge). Big 3.That is the equipment.. The box is going to be about 8 cubes net with 2 6&quot;x14&quot; aeroports so around 32 hertz tuning.... The box will be in the trunk of a 2002 VW Jetta gls firing into the cabin.Now what im asking you is what are some of the ways to seal the the trunk off from the cabin so all the pressure stays in the cabin rather than the trunk as well.....my first thought was to just buy about 100 sq ft of sound deadener then put a few layers all over the trunk and the rear deck especially... then put the box in and bolt it down... then take expandi-foam and just make a think layer all the way around the box...That seems to be the easiest. I can sand down the foam once dried too to make it smooth and pretty. lol... what do you think? should be loud?</blockquote>

[QUOTE="rickymac21, post: 6786782, member: 604748"] I already have a good idea of how to do so but here is some info on it first.. The system is going gonna be a bass racer... All the equipment is in my sig.... 2 quad 1.2 ohm soundstream xxx 15's on a pair of soundstream DTR1.3400d's . . . An Iraggi 260 amp alt, red top under the hood and 2 kinetik 2400's in the back. 2 runs of power and 2 runs of ground (0 gauge). Big 3. That is the equipment.. The box is going to be about 8 cubes net with 2 6"x14" aeroports so around 32 hertz tuning.... The box will be in the trunk of a 2002 VW Jetta gls firing into the cabin. Now what im asking you is[B][I] [/I][/B][B][I][COLOR=Red]what are some of the ways to seal the the trunk off from the cabin [/COLOR][/I][/B]so all the pressure stays in the cabin rather than the trunk as well..... my first thought was to just buy about 100 sq ft of sound deadener then put a few layers all over the trunk and the rear deck especially... then put the box in and bolt it down... then take expandi-foam and just make a think layer all the way around the box...That seems to be the easiest. I can sand down the foam once dried too to make it smooth and pretty. lol... what do you think? should be loud? [/QUOTE]

Verification