Reply to thread

Message

<blockquote data-quote="sundownz" data-source="post: 7753221" data-attributes="member: 549523">12v clamp testing :2420 @ 1.86 ohms67.1v36.06a2490 @ 1.57 ohms66.2v42.1a2750 @ 1.40 ohms62.1v44.3a2950 @ 0.94 ohms52.4v56.3aVery pleased with that. It is right on par with the v.1 model -- we will do typical minor tweaks on production and maybe squeeze a few % more out of it.As usual this was done on my Extech power clamp; it reads power out directly very accurately. I use measured voltage to calculate amperage and then actual impedance.Once I get a handful of free time I will do a 16v round-up with all of the new prototypes. ---------- Post added at 01:30 PM ---------- Previous post was at 01:30 PM ---------- We expect them to retail from authorized dealers for $775</blockquote>

[QUOTE="sundownz, post: 7753221, member: 549523"] 12v clamp testing : 2420 @ 1.86 ohms 67.1v 36.06a 2490 @ 1.57 ohms 66.2v 42.1a 2750 @ 1.40 ohms 62.1v 44.3a 2950 @ 0.94 ohms 52.4v 56.3a Very pleased with that. It is right on par with the v.1 model -- we will do typical minor tweaks on production and maybe squeeze a few % more out of it. As usual this was done on my Extech power clamp; it reads power out directly very accurately. I use measured voltage to calculate amperage and then actual impedance. Once I get a handful of free time I will do a 16v round-up with all of the new prototypes. [COLOR=Silver] [/COLOR] [COLOR=Silver][SIZE=8px]---------- Post added at 01:30 PM ---------- Previous post was at 01:30 PM ----------[/SIZE][/COLOR][SIZE=8px][/SIZE] [COLOR=Silver] [/COLOR] We expect them to retail from authorized dealers for $775 [/QUOTE]

Verification