Reply to thread

Message

<blockquote data-quote="Evilkefz" data-source="post: 4635295" data-attributes="member: 594448">500 watts RMS x 1 at 4 ohms1000 watts RMS x 1 at 2 ohmsClass bd technologyrequires 4-gauge power and ground leads and a 100-amp fuse and fuse holder wiring and hardware not included with amplifierselectable 50-250 Hz variable low-pass crossover, 24 dB/octaveMEHSA mounting technology increases the heat transfer from the MOSFET output devices to the heat sink, for higher power output, lower operating temperatures, and greater reliabilityTOPAZ noise-killing differential inputs eliminate 80% of ground loop noisepreamp outputs for easy connection to a second amplifierwired remote control of Punch Bass (0-18 dB centered at 45 Hz) gives you fingertip control of your bass impactbd Sync allows you to bridge together two separate Rockford Fosgate Class bd amps (with an optional cable) to power one woofersubsonic filter removes frequencies below 20 Hz for increased efficiency13-1/8&quot;W x 2-3/8&quot;H x 9-7/8&quot;D</blockquote>

[QUOTE="Evilkefz, post: 4635295, member: 594448"] 500 watts RMS x 1 at 4 ohms 1000 watts RMS x 1 at 2 ohms Class bd technology requires 4-gauge power and ground leads and a 100-amp fuse and fuse holder wiring and hardware not included with amplifier selectable 50-250 Hz variable low-pass crossover, 24 dB/octave MEHSA mounting technology increases the heat transfer from the MOSFET output devices to the heat sink, for higher power output, lower operating temperatures, and greater reliability TOPAZ noise-killing differential inputs eliminate 80% of ground loop noise preamp outputs for easy connection to a second amplifier wired remote control of Punch Bass (0-18 dB centered at 45 Hz) gives you fingertip control of your bass impact bd Sync allows you to bridge together two separate Rockford Fosgate Class bd amps (with an optional cable) to power one woofer subsonic filter removes frequencies below 20 Hz for increased efficiency 13-1/8"W x 2-3/8"H x 9-7/8"D [/QUOTE]

Verification