Reply to thread

Message: <blockquote data-quote="fbi90909" data-source="post: 4239989" data-attributes="member: 568679">do this.first. place shim in motor, then glue down the spider of the sub, leave shim in gap, place a towel over the gap/cone add weight, allow 4-8hrs cure time.then after the spider is glued and cured begin on the surround. still leaving the shim in place find a something with some weight and place it onto the cone with a towel underit untill you see the gap between the surround and the cone are of no more. after you find that item of weight begin to glue the surround down. let cure for 4-8 hours. then glue the dustap on. the dustcap doesn't really need much weight on it but if you want do ahead. towel under weight and allow cure.then wang away.</blockquote>

Top