Reply to thread

Message

<blockquote data-quote="lionel2" data-source="post: 2160723" data-attributes="member: 566416"><p>I was thinking of getting new subs and i really wanna go with some Resonant Engineering subs.....here is the deal...i need (3) 12&#039;s....ported box...facing up in my SUV...port firing twd back....my amp does 500x1 @ 4 ohm and 850x1 @ 2 0hm...its 2 ohm stable....its 1700w max @ 2 ohm and 1000w max @ 4 ohm....I believe the SE series 2006 will be my best bet...they are dual 4 ohm subs...3 of them will wire to a 2.67 ohm load....so that will give me about 800w rms to all 3 subs...and still 1700w peak...now the subs are 600w rms each and 1200w peak..thats 1800w rms needed for all 3 subs...I would have to have my volume on full for the subs to get rms power....but my subs now see below rms now and i have no problem...now i have (3) 300w rms subs..thats 900w rms and they are wired to 4 ohm load...giving them 500w rms to the 3 of them...thats 400w less than rms...but the RE&#039;s..almost 1200w below rms...but i will be giving each sub about 300w rms....i dont wanna get the low end line...but they are only 175w rms...i will be over powering them...RE series is the nest step up..and they are 600w rms...wish they had a 300w rms sub or something...tell me what you think i should do...i wanna stick with RE...and the RE series how much they run from a dealer??..thanks for the help.</p></blockquote><p></p>

[QUOTE="lionel2, post: 2160723, member: 566416"] I was thinking of getting new subs and i really wanna go with some Resonant Engineering subs.....here is the deal...i need (3) 12's....ported box...facing up in my SUV...port firing twd back....my amp does 500x1 @ 4 ohm and 850x1 @ 2 0hm...its 2 ohm stable....its 1700w max @ 2 ohm and 1000w max @ 4 ohm....I believe the SE series 2006 will be my best bet...they are dual 4 ohm subs...3 of them will wire to a 2.67 ohm load....so that will give me about 800w rms to all 3 subs...and still 1700w peak...now the subs are 600w rms each and 1200w peak..thats 1800w rms needed for all 3 subs...I would have to have my volume on full for the subs to get rms power....but my subs now see below rms now and i have no problem...now i have (3) 300w rms subs..thats 900w rms and they are wired to 4 ohm load...giving them 500w rms to the 3 of them...thats 400w less than rms...but the RE's..almost 1200w below rms...but i will be giving each sub about 300w rms....i dont wanna get the low end line...but they are only 175w rms...i will be over powering them...RE series is the nest step up..and they are 600w rms...wish they had a 300w rms sub or something...tell me what you think i should do...i wanna stick with RE...and the RE series how much they run from a dealer??..thanks for the help. [/QUOTE]

Verification