Reply to thread

Message

<blockquote data-quote="Crashking" data-source="post: 5687275" data-attributes="member: 558628">i have a se10 that&nbsp; needs a re-cone and i was going to make it an sexxx d2 so it would be wired down to 1ohm instead of the stock d4 and 2ohms and power it with the hifonics brutus bx1000d i had pushing it before... which was in a 1.0 cu ported box tuned to 35 inside of a regular cab dodge dakotathe sexxx was going to get put in a 1.25 ported box in my new truck which is an 06 ford f350 crew cab (4 door) but by the time i get the woofer shipped, fixed, and shipped back it&#039;ll be about $150here&#039;s the dilema... i suffer from bigger or more is better.... hence the truck change //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gifi&#039;m thinking i would get better performance all around for the bigger cab space&nbsp; from the 2 stock se10 d4&#039;s wired to 1ohm instead of the 1 sexxx d2 wired at 1 ohm from the same hifonics amp and sell the se that needs a reconethe 2 stock se10&#039;s would each have about 1.1 to 1.2cu of space... and the boxes would be located behind the seat or would it be better to put them in a single ported box at 2.4 cu?so out of the 2 possibly ways to go, which would be better? and what could i sell the se10 for in it&#039;s current condition?Thanks in advance for any advice //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif</blockquote>

[QUOTE="Crashking, post: 5687275, member: 558628"] i have a se10 that needs a re-cone and i was going to make it an sexxx d2 so it would be wired down to 1ohm instead of the stock d4 and 2ohms and power it with the hifonics brutus bx1000d i had pushing it before... which was in a 1.0 cu ported box tuned to 35 inside of a regular cab dodge dakota the sexxx was going to get put in a 1.25 ported box in my new truck which is an 06 ford f350 crew cab (4 door) but by the time i get the woofer shipped, fixed, and shipped back it'll be about $150 here's the dilema... i suffer from bigger or more is better.... hence the truck change [IMG]//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif[/IMG] i'm thinking i would get better performance all around for the bigger cab space from the 2 stock se10 d4's wired to 1ohm instead of the 1 sexxx d2 wired at 1 ohm from the same hifonics amp and sell the se that needs a recone the 2 stock se10's would each have about 1.1 to 1.2cu of space... and the boxes would be located behind the seat or would it be better to put them in a single ported box at 2.4 cu? so out of the 2 possibly ways to go, which would be better? and what could i sell the se10 for in it's current condition? Thanks in advance for any advice [IMG]//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif[/IMG] [/QUOTE]

Verification