Reply to thread

Message

<blockquote data-quote="evers" data-source="post: 7799048" data-attributes="member: 556961">Item(s) for Sale:RE AUDIO re series 8&#039;&#039; Dual 4ohmItem(s) Description/Condition:If I remember correctly these are the SE series. The subs were in a custom install that never got finished, they never saw over 100 watts rms (1/4 of the volume) due to the nature of the install. One sub has a bit of the hard foam cut off (about an 1&quot; in length) and the other sub has 2 extra holes drilled on it. Mechanically these are 10/10, cosmetic I say 8/10.Product Dimension 8&quot;Mounting Depth - 4&quot;Mounting Hole Diameter - 7.125&quot;Overall Diameter - 8.25&quot;Bolt Hole Circle - 7.75&quot;Motor Width - 4.875&quot;Motor Depth - 1.5&quot;Basket Depth - 2.5&quot;Displacement - 0.07 cu. ft.Weight - 6 lbs.T/S Parameters 8&quot;Electrical Q Value -Qes: 0.38Mechanical Q Value -Qms: 4.21Total speaker Q Value -Qts: 0.34Free Air Resonance -Fs: 22.8 HzEquivalent Compliance -Vas: 27.1 litersOne-Way, Linear Excursion -Xmax: 12 mmEfficiency -SPL 1W/1m: 81.2 dB SPLEffective Piston Area -Sd: 195 cm^2DC Resistance -Re: 3.2 ohmNominal Impedance -Znom: Dual 4 ohmThermal Power Handling -Pe: 175 WForce Factor -Bl: 15.4UPDATE!! Kicker Impulse x3i Crossover. I just found this crossover in my garage, it was working the last time I used it. However, I will be testing it just to make sure it works.&nbsp; I&#039;ll include with the SUB&#039;s for an extra $10.Price:$85 shipped for the pair plus $10 if you want the crossover.Shipping and Miscellaneous Item Information:Item Pictures: (List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)). </blockquote>

[QUOTE="evers, post: 7799048, member: 556961"] [B]Item(s) for Sale:[/B] RE AUDIO re series 8'' Dual 4ohm [B]Item(s) Description/Condition:[/B] If I remember correctly these are the SE series. The subs were in a custom install that never got finished, they never saw over 100 watts rms (1/4 of the volume) due to the nature of the install. One sub has a bit of the hard foam cut off (about an 1" in length) and the other sub has 2 extra holes drilled on it. Mechanically these are 10/10, cosmetic I say 8/10. Product Dimension 8" Mounting Depth - 4" Mounting Hole Diameter - 7.125" Overall Diameter - 8.25" Bolt Hole Circle - 7.75" Motor Width - 4.875" Motor Depth - 1.5" Basket Depth - 2.5" Displacement - 0.07 cu. ft. Weight - 6 lbs. T/S Parameters 8" Electrical Q Value -Qes: 0.38 Mechanical Q Value -Qms: 4.21 Total speaker Q Value -Qts: 0.34 Free Air Resonance -Fs: 22.8 Hz Equivalent Compliance -Vas: 27.1 liters One-Way, Linear Excursion -Xmax: 12 mm Efficiency -SPL 1W/1m: 81.2 dB SPL Effective Piston Area -Sd: 195 cm^2 DC Resistance -Re: 3.2 ohm Nominal Impedance -Znom: Dual 4 ohm Thermal Power Handling -Pe: 175 W Force Factor -Bl: 15.4 UPDATE!! Kicker Impulse x3i Crossover. I just found this crossover in my garage, it was working the last time I used it. However, I will be testing it just to make sure it works. I'll include with the SUB's for an extra $10. [B]Price:[/B] $85 shipped for the pair plus $10 if you want the crossover. [B]Shipping and Miscellaneous Item Information:[/B] [B]Item Pictures: [/B] [I](List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)). [/I] [/QUOTE]

Verification