Reply to thread

Message: <blockquote data-quote="Decipha" data-source="post: 1818275" data-attributes="member: 560051">run it with the other wires, i would, no need to drill if a hole is present, if its stock then its protectedbtw.. i have 3/0 wire going thru my firewall with no grommet i drilled the hole and clean as i could and shaved it with sandpaper, the reason there is no grommet is because to squeeze the wire thru i had to drill in between two bolts by my fuse box and thats the largest i could go, with the grommet in place i couldn't get the wire thru, i did wrap some tape around it tho just to help</blockquote>

Top