Reply to thread

Message: <blockquote data-quote="Kold_Killa" data-source="post: 4094554" data-attributes="member: 575389"><p>You could probably even look into some 2 channels that are able to bridge at 4 ohms and be safe with a 3 ohm load a the amp... After imp rise, it would be in the 4+ range so it should be qble to do it... I would however look for quality brands if you plan on going this route... I know my older Kicker Ix2302 was fine bridged at 3 ohms to an older w6.. so probably a little over 900 watts</p></blockquote><p></p>

Top