Reply to thread

Message: <blockquote data-quote="ashren315" data-source="post: 8550052" data-attributes="member: 670616">If you are using RCA outs from your HU to send the signal to the amp, then select low level.  If however you are using the speaker outputs to run the signal to the amp then select high level on the amp.Set the amp crossover as Low pass and set the frequency to anywhere between 50 to 120htz depending on subs/speakers you are running.   If your regular speakers are 6.5", then go with around 80 htz but if your regular speakers are something like 4", set it to around 120htz.</blockquote>

Top