problems with viper 600hf

[BoomCrew 10+ year member]

i got a viper 600hf for free, i am going to hook it up for insurance reasons. the only thing i want it to do is arm, disarm and if my car gets touched the alarm will go off. so i got the power and ground hooked up, i have also the yellow wire for the ignition hooked up and of course the siren, but i am not hooking up the starter kill that is why i got it for free cause its bad, so to program the unit i have the green wire grounded, but for some reason i am not able to program the remote. am i missing wires or something? what all has to be done to hooke up what i want?

Click to read more...

 

[Slody4Futbol 10+ year member]

is the antenna plugged up?

 

[Slody4Futbol 10+ year member]

you are grounding the green... turning ignition on... pressing and releasing valet switch once... then pressing and holding it... then hitting the button on the remote for arm/disarm/panic?

 

[BoomCrew 10+ year member]

yea i am, but the light will blink once and then when i have the valet button still pushed i push the one button on the remote and it never blinks again to confirm the code

 

[crhye250r 10+ year member]

The unit could be faulty. That would prevent it from taking programming. Either that, or the programming sequence for that unit could be different than what you are trying.