Reply to thread

Message

<blockquote data-quote="skydeaner" data-source="post: 2309538" data-attributes="member: 570181">Ok, I don&#039;t even have that impresssive of a sub setup (3 11kv.2&#039;s fully powered hittin maybe 140db&#039;s).&nbsp; I need a set of comps that will keep up.&nbsp;&nbsp; I have been through 2 sets of mb quart comps, discus then premiums, CDT classics, and now my ADS 346&#039;s.&nbsp; The ADS do better than any so far, but I blew one side and now am thinkin maybe I should figure something else out.&nbsp; No distortion til they blew though //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gifOk, so my question is...&nbsp; 3 way is kinda what I am lookin for here.&nbsp; I am going to throw a pair of eu-700&#039;s in my doors for midbass 65-150hz.&nbsp; The thing I need is a set of components that will handle the 150hz and up with maybe 300wrms per side.&nbsp; 6.5&#039;s are fine, although since they will be going in kickpanels the smaller the better.&nbsp; If I have to go all active I can.&nbsp; I just can&#039;t find anything that will get loud enough.&nbsp; I guess power handling isn&#039;t that big of a deal as long as it gets really loud, I know if is effecient enough i won&#039;t need 300wrms a side, that is just what I have to work with.ORShould I just run two sets of components up front?&nbsp; I could probably fit two 5 1/4&#039;s in the kicks and then eu700&#039;s in the doors and 2 tweeters in each apillar.I know what I am doin, really I do, I have made tons of other people plenty happy with systems I have installed, but I am unable to make myself happy.&nbsp; I need loudness without distortion and have the amp power to do it now, so help me out please</blockquote>

[QUOTE="skydeaner, post: 2309538, member: 570181"] Ok, I don't even have that impresssive of a sub setup (3 11kv.2's fully powered hittin maybe 140db's). I need a set of comps that will keep up. I have been through 2 sets of mb quart comps, discus then premiums, CDT classics, and now my ADS 346's. The ADS do better than any so far, but I blew one side and now am thinkin maybe I should figure something else out. No distortion til they blew though [IMG]//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif[/IMG] Ok, so my question is... 3 way is kinda what I am lookin for here. I am going to throw a pair of eu-700's in my doors for midbass 65-150hz. The thing I need is a set of components that will handle the 150hz and up with maybe 300wrms per side. 6.5's are fine, although since they will be going in kickpanels the smaller the better. If I have to go all active I can. I just can't find anything that will get loud enough. I guess power handling isn't that big of a deal as long as it gets really loud, I know if is effecient enough i won't need 300wrms a side, that is just what I have to work with. [SIZE=14px]OR[/SIZE] Should I just run two sets of components up front? I could probably fit two 5 1/4's in the kicks and then eu700's in the doors and 2 tweeters in each apillar. I know what I am doin, really I do, I have made tons of other people plenty happy with systems I have installed, but I am unable to make myself happy. I need loudness without distortion and have the amp power to do it now, so help me out please [/QUOTE]

Verification