Reply to thread

Message

<blockquote data-quote="audiobahnuser18" data-source="post: 4114772" data-attributes="member: 564219">shoot man just do it yourself.&nbsp; order fatmat , raammatt , second skin .&nbsp; i just got 50sq ft of fatmat $60 plus shipping but that&#039;s more then enough to do your doors.&nbsp; ok here&#039;s what u doSTEPS1.) pull off the door panel most of the time there just plastic clips/poppers that u can pop out from the actual metal on the door . (CAUTION: Make sure that all screws are taken out first of the door panel)2.) take out the speaker3.) clean off the door panel if it has anything on it4.) get yourself a wooden roller or rubber roller whichever5.) take each sheet of deadner and slowly roll on the deadner to the door making sure that it is flat and sticking on the door fully6.) make sure the door is done fully but do the inside of the door first i should of stated that first sry (making sure though the window can roll up and down with no problems.)7.) put the speaker back in (make sure your connections on the speaker are still good not loose)8.) put the door panel back in pop the poppers/clips back in9.) put the screws back in the door10.) test door panel make sure it&#039;s on there correctly11.) give yourself a pat on the back because u just saved yourself a good amount of cash by doing it yourself<img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite8" alt=":D" title="Big grin&nbsp; &nbsp; :D" loading="lazy" data-shortname=":D" />.need anymore help man just lmk.&nbsp; Good luck.</blockquote>

[QUOTE="audiobahnuser18, post: 4114772, member: 564219"] shoot man just do it yourself. order fatmat , raammatt , second skin . i just got 50sq ft of fatmat $60 plus shipping but that's more then enough to do your doors. ok here's what u do [B]STEPS[/B] 1.) pull off the door panel most of the time there just plastic clips/poppers that u can pop out from the actual metal on the door . (CAUTION: Make sure that all screws are taken out first of the door panel) 2.) take out the speaker 3.) clean off the door panel if it has anything on it 4.) get yourself a wooden roller or rubber roller whichever 5.) take each sheet of deadner and slowly roll on the deadner to the door making sure that it is flat and sticking on the door fully 6.) make sure the door is done fully but do the inside of the door first i should of stated that first sry (making sure though the window can roll up and down with no problems.) 7.) put the speaker back in (make sure your connections on the speaker are still good not loose) 8.) put the door panel back in pop the poppers/clips back in 9.) put the screws back in the door 10.) test door panel make sure it's on there correctly 11.) give yourself a pat on the back because u just saved yourself a good amount of cash by doing it yourself:D. need anymore help man just lmk. Good luck. [/QUOTE]

Verification