BOUGHT THIS FROM A FAMILY MEMBER IN GREAT NEED OF MONEY JUST LOOKING TO GET MY MONEY BACK OUT OF IT I GUARANTEE IT TO WORK NO QUESTIONS ASKED. HERE ARE THE SPECS The retail on this amp was $779.00 in 1997. ASKING 200 OBO 248-941-9715 DAVE LOOK IT UP ON EBAY AND TELL ME ITS NOT WORTH IT THEY ARE GOING FOR OVER 300
OUTPUT POWER
2 x 150 wrms @ 4ohm, 2 x 300 wrms @ 2ohm, 1 x 600 wrms @ 4ohm
SPECS
Power Bandwith: 4.5Hz - 100kHz--Total Harmonic Distortion: 0.02%--Signal to Noise Ratio: 115dB
Input Topology: Balanced Differential--Input Sensitivity: 120mV - 12Vrms--Input Impedance: 10Kohm
Load Impedance (stereo output): 2-8ohm--Load Impedance (bridged): 4-8ohm
Supply Voltage: 11-15 volts dc
Damping Factor: >500--Slew Rate: >50V/us
QBASS PLUS Equalization: up to +18dB boost--Selectable "Q" Value: 2 or 4
Frequency Centers: 30Hz, 36Hz, 44Hz, 60Hz--Crossover: 24dB/Octave 90Hz Linkwitz-Riley
Idle Current: 2amps
FEATURES
Two Way 24dB/Octave 90Hz Crossover--QBASS Plus Subwoofer Equalization Circuitry--QBASS Remote Compatible
RCA Crossover Ouput--Forced Air Thermal Management System--High Mass Internal Heatsink
Symmetrical Circuit Design--Balanced Differential Input Circuit--High Level Input Signal Capability
PWM (Pulse Width Modulated) Regulated Power Supply--Fully Complimentary Triple Darlington Output Section
AM-IV Protection Circuitry--Gold Plated RCA Connectors--ACM-420 Noise Gate Compatible
OUTPUT POWER
2 x 150 wrms @ 4ohm, 2 x 300 wrms @ 2ohm, 1 x 600 wrms @ 4ohm
SPECS
Power Bandwith: 4.5Hz - 100kHz--Total Harmonic Distortion: 0.02%--Signal to Noise Ratio: 115dB
Input Topology: Balanced Differential--Input Sensitivity: 120mV - 12Vrms--Input Impedance: 10Kohm
Load Impedance (stereo output): 2-8ohm--Load Impedance (bridged): 4-8ohm
Supply Voltage: 11-15 volts dc
Damping Factor: >500--Slew Rate: >50V/us
QBASS PLUS Equalization: up to +18dB boost--Selectable "Q" Value: 2 or 4
Frequency Centers: 30Hz, 36Hz, 44Hz, 60Hz--Crossover: 24dB/Octave 90Hz Linkwitz-Riley
Idle Current: 2amps
FEATURES
Two Way 24dB/Octave 90Hz Crossover--QBASS Plus Subwoofer Equalization Circuitry--QBASS Remote Compatible
RCA Crossover Ouput--Forced Air Thermal Management System--High Mass Internal Heatsink
Symmetrical Circuit Design--Balanced Differential Input Circuit--High Level Input Signal Capability
PWM (Pulse Width Modulated) Regulated Power Supply--Fully Complimentary Triple Darlington Output Section
AM-IV Protection Circuitry--Gold Plated RCA Connectors--ACM-420 Noise Gate Compatible