Hey everyone...
Got a rather interesting question. In my install, I decided to take the custom-built box I have for my 2 15"s, and do all of the audio and power distribution inside of it. I have 2 amps (low and mids/high) that will be attached to the front of the box, with all the RCA's and Speaker Leads going in and out of the box.
Here's my dilemma:
I want to run power into the box using a plug connector and receiver of some type, but have no idea where to get one. My amps take around 120amps of current @ 13.5volts, so I need something that'll take that without melting/catching on fire/etc.
The kind of plug/receiver I'm looking at getting is along the lines of the one at this link:
Power Connector
I want one thats a twist-lock plug though, to prevent possible disconnection. It also has to be able to take 2 4ga power wires (hot and ground).
So, to sum it all up, I'm looking for an electrical plug and receiver that:
1) is like the link above, but locking
2) will take 2 4ga power wires
3) will handle roughly 120amps @ 13.5volts DC
Anyone know where I can get such a beast? Or maybe have another way to run the power into the box? The effect I'm going for is the ability for quick-disconnect (preferably tool-less).
-elm3r
