Reply to thread

Message

<blockquote data-quote="joker0907" data-source="post: 4945429" data-attributes="member: 599055">well i just took measurements... not looking so good.... so i cant go any wider than 34 &quot; total on the length of the box so im fine there but if i want room for the amp rack im making in my trunk then im going to have to settle with about 20 inches of depth maybe a lil less... but i can raise my height up to about 17&quot;so since im not really any good at the box making thing ive just been punching in numbers to see what i get and this is the best i could figure up on thatsame length 34 &quot; totalheighth of 16 &quot;20&quot; on the depthand have dual ports of 1.5 inches each which sould tune it to around 31 hz i believe? or i could make them like 1.75 inches each and that would push them to 34 hzwith the port length of 3 inchesif u want an idea of what im looking at<a href="http://reaudio.com/speaker_box/LPort_Box_Calc.html" target="_blank">http://reaudio.com/speaker_box/LPort_Box_Calc.html</a>thats where i made it and the inputs are17162020.751.5-1.753thanks for the help i know im kinda stupid at this stuffo and btw what i was thinking in my head when i did this was that i would use that for 1 single sub and then bassically double that for the 2 like combine the 2 boxes to make a dual L port box i guess idk im stupid when it comes to this stuff lol</blockquote>

[QUOTE="joker0907, post: 4945429, member: 599055"] well i just took measurements... not looking so good.... so i cant go any wider than 34 " total on the length of the box so im fine there but if i want room for the amp rack im making in my trunk then im going to have to settle with about 20 inches of depth maybe a lil less... but i can raise my height up to about 17" so since im not really any good at the box making thing ive just been punching in numbers to see what i get and this is the best i could figure up on that same length 34 " total heighth of 16 " 20" on the depth and have dual ports of 1.5 inches each which sould tune it to around 31 hz i believe? or i could make them like 1.75 inches each and that would push them to 34 hz with the port length of 3 inches if u want an idea of what im looking at [URL="http://reaudio.com/speaker_box/LPort_Box_Calc.html"]http://reaudio.com/speaker_box/LPort_Box_Calc.html[/URL] thats where i made it and the inputs are 17 16 20 20 .75 1.5-1.75 3 thanks for the help i know im kinda stupid at this stuff o and btw what i was thinking in my head when i did this was that i would use that for 1 single sub and then bassically double that for the 2 like combine the 2 boxes to make a dual L port box i guess idk im stupid when it comes to this stuff lol [/QUOTE]

Verification