Reply to thread

Message

<blockquote data-quote="audiobaun" data-source="post: 7830321" data-attributes="member: 634282"><p>Im open to all kinds of ideas..Looking into adding some midrange and 1in tweets in pillars..have 1in now,doors are all matted/have cdt HD Briaxel in stock location 6.5 w angled mdf rings,and 5.25 Polk MM woofers and CDT 1in tweets in doors at the existing tweeter locations,with using the Autotek Mean Machine 99 in 2ohms, and front tweets active in pillars on the Autotek bts 7204,and rears off other 2 ch on cdt 6.5 components,4 1k 10s on 2-BTS 7150s @2ohms @32Hz per chamber,changing out to FI ssd12s soon,wanting to do a center console setup with a 10in sub at approx 80hz,and 5.25 mids on each side,firing angled towards seats,and remove rears to front drs,and remove polks,pods rear for mid bass angled off ea corners where existing 4x6 are./were.Work in progress,for my last build in this truck<img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite1" alt=":)" title="Smile&nbsp; &nbsp; :)" loading="lazy" data-shortname=":)" />I thought about building door panels for the 2 sets of components that I have,and putting a 6.5 mid bass in the stock location?or cap it off and utilize the ten</p></blockquote><p></p>

[QUOTE="audiobaun, post: 7830321, member: 634282"] Im open to all kinds of ideas..Looking into adding some midrange and 1in tweets in pillars..have 1in now,doors are all matted/have cdt HD Briaxel in stock location 6.5 w angled mdf rings,and 5.25 Polk MM woofers and CDT 1in tweets in doors at the existing tweeter locations,with using the Autotek Mean Machine 99 in 2ohms, and front tweets active in pillars on the Autotek bts 7204,and rears off other 2 ch on cdt 6.5 components,4 1k 10s on 2-BTS 7150s @2ohms @32Hz per chamber,changing out to FI ssd12s soon,wanting to do a center console setup with a 10in sub at approx 80hz,and 5.25 mids on each side,firing angled towards seats,and remove rears to front drs,and remove polks,pods rear for mid bass angled off ea corners where existing 4x6 are./were.Work in progress,for my last build in this truck:)I thought about building door panels for the 2 sets of components that I have,and putting a 6.5 mid bass in the stock location?or cap it off and utilize the ten [/QUOTE]

Verification