Reply to thread

Message

<blockquote data-quote="BOOMINGRANDPA" data-source="post: 8647111" data-attributes="member: 671921"><p>u can use 12 or 24 (try both see if 1 sounds better) only use hu xovers ,use hp at 80-100hz or so for speakers,&nbsp; 60-100hz for sub LP (if u listen to rock 80-100, if mostly rap 70-80 normally works well) since it&#039;s a pioneer amp it won&#039;t have ss filter (which u really need for ported box unless u have a nice one tuned in the 32hz range) so that means the freqs on the amp is lp xover if it say off turn to that (after etting lp to 60-100 on hu) if no off turn it to highest freq 240. that way u control everything from hu and u can adjust xovers easy and see what sounds best just set both at 80hz to start and go up and down till u don&#039;t hear distortion (keep lp 100hz or below)&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; yeah gain is different for every amp and system, they is a way to set it using test tone and meter but if hu has 4v or more 1/4- 1/2 is normally right..</p></blockquote><p></p>

[QUOTE="BOOMINGRANDPA, post: 8647111, member: 671921"] u can use 12 or 24 (try both see if 1 sounds better) only use hu xovers ,use hp at 80-100hz or so for speakers, 60-100hz for sub LP (if u listen to rock 80-100, if mostly rap 70-80 normally works well) since it's a pioneer amp it won't have ss filter (which u really need for ported box unless u have a nice one tuned in the 32hz range) so that means the freqs on the amp is lp xover if it say off turn to that (after etting lp to 60-100 on hu) if no off turn it to highest freq 240. that way u control everything from hu and u can adjust xovers easy and see what sounds best just set both at 80hz to start and go up and down till u don't hear distortion (keep lp 100hz or below) yeah gain is different for every amp and system, they is a way to set it using test tone and meter but if hu has 4v or more 1/4- 1/2 is normally right.. [/QUOTE]

Verification