Reply to thread

Message

<blockquote data-quote="RoYALbLUE08" data-source="post: 7782777" data-attributes="member: 637100">so what is the verdict???i bypassed the headunit and everything that had to do with the car connected to the ampi plugged in my iphone with an rca directly into the amp and it played VERY low and when i barely turned on the volume to like 1/4 of the way it goes into protect mode... my power wire is very secure and my ground wire i just took it out completely, sanded down the chassis more and reconnected very tight.... so now what could be the problem?this is the second brand new amp i tried from sonic electronix completely sealed and both the same issue... so theres 2 things its either somehow the amp again, or the power and ground cables, which makes no sense at all for it to be the wires, i just re-checked the fuse and re-did the ground (0&nbsp; gauge wire) and i have the big 3 upgrade done too, i checked the voltage AT the amp by plugging in my&nbsp; DMM probes to the 12v power wire and the ground and it said the amp is recieving 14.2-14.4 voltsany ideas guys before i pull the plug on this and pay shipping for a new amp again //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif</blockquote>

[QUOTE="RoYALbLUE08, post: 7782777, member: 637100"] so what is the verdict??? i bypassed the headunit and everything that had to do with the car connected to the amp i plugged in my iphone with an rca directly into the amp and it played VERY low and when i barely turned on the volume to like 1/4 of the way it goes into protect mode... my power wire is very secure and my ground wire i just took it out completely, sanded down the chassis more and reconnected very tight.... so now what could be the problem? this is the second brand new amp i tried from sonic electronix completely sealed and both the same issue... so theres 2 things its either somehow the amp again, or the power and ground cables, which makes no sense at all for it to be the wires, i just re-checked the fuse and re-did the ground (0 gauge wire) and i have the big 3 upgrade done too, i checked the voltage AT the amp by plugging in my DMM probes to the 12v power wire and the ground and it said the amp is recieving 14.2-14.4 volts any ideas guys before i pull the plug on this and pay shipping for a new amp again [IMG]//content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif[/IMG] [/QUOTE]

Verification