Reply to thread

Message: <blockquote data-quote="Atimm693" data-source="post: 5386777" data-attributes="member: 572164"><p>Since you have 2 SVC 4 ohms subs then you can only wire them to 8 or 2 ohms, at 8 you won't get much power, 2 is too low for the amp. Your best bet using that equipment is to run one sub on each channel of the amp. Can you still return the subs?  The best situation is to bring them back and swap them for 2 ohm subs.</p></blockquote><p></p>

Top