Johnny Drama
5,000+ posts
Banned
- Thread Starter
- #61
Appreciate the help.They're all usually 2" PVC. 120v/240v - all need to be wired into the pump timer, and need to be bonded per code.
It all depends on where you mount the flow switch, if you mount it before the cell there needs to be 12" of straight pipe to get the correct pressure, otherwise if it's mounted after the cell, the cell itself can be the 12" of pipe.
General rule of thumb: Eliminate ALL 90* angles if possible. //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif
