Reply to thread

Message: <blockquote data-quote="mendon mafia" data-source="post: 3979093" data-attributes="member: 584590"><p>i would sand the surface of the cone with like 400+ grit sand paper and then clean with rubbing alcohol after to help the adhesion of the paint as much as possible because they are gonna vibrate a lot (obviously).  i would also look for just normal plastic paint you arent going to need that much flex protection unless your cone is flexible lol.  if you do mutiple, thin even coats and take your time it should turn out very nice.</p></blockquote><p></p>

Top