Reply to thread

Message: <blockquote data-quote="HCCAfan" data-source="post: 1814248" data-attributes="member: 541047"><p>turn your high pass on, turn the dial to your port tuning (prolly 30 hertz) because your high pass is your subsonic filter when activated.  turn your low pass on and to 80-90 hertz.  phase at 0.  turn your q boost all the way down to 0.  turn your gain down, get out the tones, and adjust gain accordingly.  if you dont need the q boost, great, its only there to get more out of the amp if needed.</p></blockquote><p></p>

Top