Reply to thread

Message

<blockquote data-quote="johnny0813" data-source="post: 5523508" data-attributes="member: 606706">so will this amp run the two 4 ohm subs on mono?Default Sony XM-504X 4ch amppermalinkXM-504X 4/3/2 channel- 50Wx4 into 4 ohms, 20-20kHz, at 0.04% THD- 50Wx2 + 130Wx1 into 4 ohms, 20-20kHz, at 0.1% THD- 70Wx4 into 2 ohms, 20-20kHz, at 0.1% THD- Adjustable 50 - 200Hz 12dB/Oct HPF/LPF w/defeat- 40Hz Lo frequency EQ adjustable 0 to +12dB- Individually adjustable input gain controls- Independent Left + Right LED level indicators- High level inputs- Discrete FET predrivers, Bi-Polar final stage Regulated MOSFET power supply- Dual mode operation allows stereo &amp;amp; mono drive- Protection for temp, voltage &amp;amp; current faults- Balanced input circuit for noise isolation- Chassis mounted gold plated RCA/screw terminals- dim:13 1/8 x 2 1/8 x 11</blockquote>

[QUOTE="johnny0813, post: 5523508, member: 606706"] so will this amp run the two 4 ohm subs on mono? Default Sony XM-504X 4ch amp permalink XM-504X 4/3/2 channel - 50Wx4 into 4 ohms, 20-20kHz, at 0.04% THD - 50Wx2 + 130Wx1 into 4 ohms, 20-20kHz, at 0.1% THD - 70Wx4 into 2 ohms, 20-20kHz, at 0.1% THD - Adjustable 50 - 200Hz 12dB/Oct HPF/LPF w/defeat - 40Hz Lo frequency EQ adjustable 0 to +12dB - Individually adjustable input gain controls - Independent Left + Right LED level indicators - High level inputs - Discrete FET predrivers, Bi-Polar final stage Regulated MOSFET power supply - Dual mode operation allows stereo & mono drive - Protection for temp, voltage & current faults - Balanced input circuit for noise isolation - Chassis mounted gold plated RCA/screw terminals - dim:13 1/8 x 2 1/8 x 11 [/QUOTE]

Verification