OMG!!!!! What do I do now!?!?

[BassBallin]

hello just get another dual 4 ohm sub then ur runnin them at 2.6 ohms!!!

 

[IgnoreMe 5,000+ posts]

wire them to 1 ohm. after box rise, you should be in safe range with the amp.

i wouldnt worry about it.

 

[Rich B 5,000+ posts]

Kicker specifies that the 750.1 is 2 ohm stable. 2 Dual 4 ohm subs wire to 1 ohm.

If they are dual 4 ohm, they can be ran at 4 ohms onto a mono amp if they are wired in series (where each sub would become 8 ohms), then the two subs are paralleled together to create a4 ohm load at the amp.

That only applies if they are dual 4 ohm subs though.

 

[benzmansl65amg 10+ year member]

wire it to 4 ohm temporarily then when u get a trade or are able to sell amp do it... wont hurt anything and will have bass

 

[60ndown 10+ year member]

http://mobile.jlaudio.com/support_pages.php?page_id=161

 

[skylineTT 10+ year member]

2 2ohm subs can go to 2 ohms but you can just trade for a 1-ohm stable amp and use those subs.