OMG! lemans23 shows his setup! 56k, **** one

[squeak9798 5,000+ posts]

Sander ain't going to help you when a board is 1/4" too short //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[PV Audio 5,000+ posts]

Not much he can do since he has giant lumps of silicone all over them...........
He needs to just learn how to construct one properly....you know, like with joints that actually sit flush with each other //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

hey don't laugh...but yes they are sealed excellently. i have no saw to make precision cuts tho

 

[squeak9798 5,000+ posts]

Straight edge + clamps = straight cuts on board.

Not rocket science.

 

[PV Audio 5,000+ posts]

Straight edge + clamps = straight cuts on board.
Not rocket science.

if can make a straight cut with my saw, i'll give u 50 dollars. no shit, the blades come out after every cut. got it for 14 bucks, like 1989 model or something //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif . i'm making a folded horn cabinet for a 10" pos i picked up and its being constructed by my neighbor (doctor and carpenter w/ workshop in his basement) so that'll look beautiful

 

[vosschs 5,000+ posts]

if can make a straight cut with my saw, i'll give u 50 dollars. no shit, the blades come out after every cut. got it for 14 bucks, like 1989 model or something //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif . i'm making a folded horn cabinet for a 10" pos i picked up and its being constructed by my neighbor (doctor and carpenter w/ workshop in his basement) so that'll look beautiful

well stop bit(hin and buy a new fuvkin saw

 

[req 5,000+ posts]

no lemans. i meant the fullrange towers. the DIY ones you made. how much did it cost (total) to build, and how are you crossing them over //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 

[PV Audio 5,000+ posts]

well stop bit(hin and buy a new fuvkin saw

//content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif i have no money after buying a camera

 

[squeak9798 5,000+ posts]

well stop bit(hin and buy a new fuvkin saw

//content.invisioncic.com/y282845/emoticons/word.gif.64b12e39f936af3b4fff38a1c0bd0244.gif

I would have picked up a new saw rather than a digi cam. The 'cam can wait; a new saw for you obviously can't //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

 

[PV Audio 5,000+ posts]

no lemans. i meant the fullrange towers. the DIY ones you made. how much did it cost (total) to build, and how are you crossing them over //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif thats 2 separate ones....the one with the white cones and the tweet is separate from the bronze cone. the bronze cone is the full range (obviously //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif ) which one were u talking about?

 

[PV Audio 5,000+ posts]

http://konicaminolta.com/products/consumer/digital_camera/dimage/dimage-z3/index.html

teh hotness, but in black

 

[zachzchw 5,000+ posts]

Your Dad tells you how much money you can spend??

 

[PV Audio 5,000+ posts]

Your Dad tells you how much money you can spend??

no but he thought i was getting shady (obviously not exact words) if i can spend all this money. he thought i was a dealer or something, so i opted for the bargain model

 

[BeanII 10+ year member]

hey all, finally got a digi cam (konica minolta dimage z3, dad wouldn't let me buy rebel 300d cause i've been spending 2 much $$$)

Maybe you should invest in................... hmmmmm I don't know, a saw? //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

Either that or I'm going to buy stock in a silcone company. hahah //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[PV Audio 5,000+ posts]

Maybe you should invest in................... hmmmmm I don't know, a saw? //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

Either that or I'm going to buy stock in a silcone company. hahah //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

HAHAHAHA **** you //content.invisioncic.com/y282845/emoticons/mad.gif.c18f003ab0ef8a0d9c27ca78d77a6392.gif//content.invisioncic.com/y282845/emoticons/mad.gif.c18f003ab0ef8a0d9c27ca78d77a6392.gif

//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[cjjackson85 5,000+ posts]

??? i love the e3s on teh ipod...whats the problem?

All 3 iPods i've had can't even compete with the SQ on my iRiver DAPs... You'd be surprised how much better iRivers sound... Want a 6gb mini silver? //content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif