Reply to thread

Message: <blockquote data-quote="FtheNutHuggers" data-source="post: 7379105" data-attributes="member: 632254"><p>then like Bettr illustrated above, wire each subwoofers' pair of coils in series to make 4) single 8ohm voice coil subwoofers. if all your wires are coming out of the box, then you should have 4) positive and 4) negative wires. tie all 4 positive wires together (either at the amp or in one spot with a single wire going from there to your amp) and the exact same thing for the 4) negative wires. that will give you the DCR of 4ohms nominal that you are searching for.</p></blockquote><p></p>

Top