Reply to thread

Message

<blockquote data-quote="Doxquzme" data-source="post: 8868721" data-attributes="member: 689267">At this point, I think I&#039;m going to build out the OEM location for the tweeters using the offset surface mounts that came with the CDT tweeters. They usually for mounting on the rear package tray, but if I glass them to the OEM location, sideways, would put them at almost the perfect on axis angle. I would then get pods like these or maybe that german company that makes them to order, an mounthm on the dash directly to the right, horizontally, angled the same as the tweeters, seems to be what I&#039;ve settled on. It would aim both, on a horizontal plain, almost perfectly at the center headrest area right between the seats and would avoid reflections from the windshield, almost perfect. Like this but with the centers of the drivers on an equal line across (and at the same angle, in the sail panel)[ATTACH=full]56155[/ATTACH]That way all I need is the midrange pod and to build out the sail panel, should work out well. ALmost like this, but the tweeters in the sail location and a pod for the mids, about an inch apartm much closer than this but similar alignment.[ATTACH=full]56157[/ATTACH]</blockquote>

[QUOTE="Doxquzme, post: 8868721, member: 689267"] At this point, I think I'm going to build out the OEM location for the tweeters using the offset surface mounts that came with the CDT tweeters. They usually for mounting on the rear package tray, but if I glass them to the OEM location, sideways, would put them at almost the perfect on axis angle. I would then get pods like these or maybe that german company that makes them to order, an mounthm on the dash directly to the right, horizontally, angled the same as the tweeters, seems to be what I've settled on. It would aim both, on a horizontal plain, almost perfectly at the center headrest area right between the seats and would avoid reflections from the windshield, almost perfect. Like this but with the centers of the drivers on an equal line across (and at the same angle, in the sail panel) [ATTACH type="full" alt="1705376224380.png"]56155[/ATTACH] That way all I need is the midrange pod and to build out the sail panel, should work out well. ALmost like this, but the tweeters in the sail location and a pod for the mids, about an inch apartm much closer than this but similar alignment. [ATTACH type="full"]56157[/ATTACH] [/QUOTE]

Verification