Reply to thread

Message

<blockquote data-quote="4Flat4Life" data-source="post: 7754013" data-attributes="member: 641954">I do not believe it does, no under the seat subs, so that&#039;s my assumption... My playlist involves anything from Lil Wayne and Mac Miller, to Rolling stones, Metallica, and even some garth brooks. So pretty much everything.So, if I am understanding this correctly... I will have 2 tweeters and 2 speakers in my front doors all connected to the same amp, we will call that Amp A. Then the two speakers in the rear doors also connected to Amp A. And then in the trunk the JL Subs will hooked up to a MonoBlock Amp, Amp B. and all of that can easily be connected to the monitor head unit I posted earlier?I hooked up my first system completely by my self, (Still want to avoid active crossover never done that), it was 4 speakers with tweets built in, aftermarket HU and the subs, with a CAP, everything was easy to install, the difference for this set up is a monitor instead of a head unit, and separate tweets.The only thing I am not understanding is how the tweets hook up?? Do I splice from the positive and negative of the front door speaker and connect that to the tweet? So it will go from stereo amplifier, to front speaker, to tweeter??I am going to go look up my speaker size and start getting this thing priced out.</blockquote>

[QUOTE="4Flat4Life, post: 7754013, member: 641954"] I do not believe it does, no under the seat subs, so that's my assumption... My playlist involves anything from Lil Wayne and Mac Miller, to Rolling stones, Metallica, and even some garth brooks. So pretty much everything. So, if I am understanding this correctly... I will have 2 tweeters and 2 speakers in my front doors all connected to the same amp, we will call that Amp A. Then the two speakers in the rear doors also connected to Amp A. And then in the trunk the JL Subs will hooked up to a MonoBlock Amp, Amp B. and all of that can easily be connected to the monitor head unit I posted earlier? I hooked up my first system completely by my self, (Still want to avoid active crossover never done that), it was 4 speakers with tweets built in, aftermarket HU and the subs, with a CAP, everything was easy to install, the difference for this set up is a monitor instead of a head unit, and separate tweets. The only thing I am not understanding is how the tweets hook up?? Do I splice from the positive and negative of the front door speaker and connect that to the tweet? So it will go from stereo amplifier, to front speaker, to tweeter?? I am going to go look up my speaker size and start getting this thing priced out. [/QUOTE]

Verification