Reply to thread

Message

<blockquote data-quote="Jeffp5347" data-source="post: 8467079" data-attributes="member: 668574">Not sure if this is the right forum for this question.&nbsp; Hey guys I am a newb at building but I&#039;m gonna try my hand at a simple first build.&nbsp;&nbsp; I have 2 Kenwood <a href="http://www.kenwood.com/usa/car/speakers/kfc-w12ps/" target="_blank">KFC-W12PS | Speakers | CAR ENTERTAINMENT | KENWOOD USA</a> sub&#039;s that I ran in a prefabbed sealed box in my maxima with about 1 cu. Ft per sub.&nbsp; I know it was under what was needed but it still pounded.&nbsp;&nbsp; So now I have a 2015 Silverado cc and was looking to do a ported box behind the console almost like a second console, which in my rough estimate a 15x15x15 box ported with 1 sub.&nbsp; I could possibly make the lower part of the box extend under the seat to get some more volume.&nbsp; Building a square or L shaped box should be fairly simple but I have a few question on this box and terms.Since I&#039;m looking to do ported I have no clue how to find what I should tune the box to in hertz or size of the port or placement.How do I find or know what freq the box should be tuned to.Also being ported in a truck should this sound good.&nbsp; I have the sub so as of now I&#039;m not looking to change it as I do know there are better sub&#039;s out thereSent from my Nexus 6P using Tapatalk</blockquote>

[QUOTE="Jeffp5347, post: 8467079, member: 668574"] Not sure if this is the right forum for this question. Hey guys I am a newb at building but I'm gonna try my hand at a simple first build. I have 2 Kenwood [URL="http://www.kenwood.com/usa/car/speakers/kfc-w12ps/"]KFC-W12PS | Speakers | CAR ENTERTAINMENT | KENWOOD USA[/URL] sub's that I ran in a prefabbed sealed box in my maxima with about 1 cu. Ft per sub. I know it was under what was needed but it still pounded. So now I have a 2015 Silverado cc and was looking to do a ported box behind the console almost like a second console, which in my rough estimate a 15x15x15 box ported with 1 sub. I could possibly make the lower part of the box extend under the seat to get some more volume. Building a square or L shaped box should be fairly simple but I have a few question on this box and terms. Since I'm looking to do ported I have no clue how to find what I should tune the box to in hertz or size of the port or placement. How do I find or know what freq the box should be tuned to. Also being ported in a truck should this sound good. I have the sub so as of now I'm not looking to change it as I do know there are better sub's out there Sent from my Nexus 6P using Tapatalk [/QUOTE]

Verification