Reply to thread

Message

<blockquote data-quote="Boogie Knights" data-source="post: 6790001" data-attributes="member: 610384">Alright I&#039;ve tried trouble shooting this on my own, and I&#039;m all out of ideas.I have a sundown 1200d amp and two 12&#039;&#039; AQ sdc 2.5 stock headunitAbout a month ago my subs would start going out at random times.I&#039;d lower the volume and they&#039;d start up again.Then they would go out and wouldn&#039;t start until I restarted my truck.I did notice that the amp would go into protect, but after a few minutes it would come out.And everything would work again. Now as of two weeks I get no sound from my subs.And the amp isn&#039;t in protect mode. What I noticed was after I disconnected both cables fromthe battery the amp/subs worked after I turned off the truck no more sound.Now things I did.Checked RCA&#039;s / switched RCA&#039;sChecked the groundChecked the power cables - they were loose at the battery and fuse ( fixed it )Removed the subs from the box made sure connections were good ( they were)Checked the LOC all working fine.So does any one have an idea what the problem could be.</blockquote>

[QUOTE="Boogie Knights, post: 6790001, member: 610384"] Alright I've tried trouble shooting this on my own, and I'm all out of ideas. I have a sundown 1200d amp and two 12'' AQ sdc 2.5 stock headunit About a month ago my subs would start going out at random times. I'd lower the volume and they'd start up again. Then they would go out and wouldn't start until I restarted my truck. I did notice that the amp would go into protect, but after a few minutes it would come out. And everything would work again. Now as of two weeks I get no sound from my subs. And the amp isn't in protect mode. What I noticed was after I disconnected both cables from the battery the amp/subs worked after I turned off the truck no more sound. Now things I did. Checked RCA's / switched RCA's Checked the ground Checked the power cables - they were loose at the battery and fuse ( fixed it ) Removed the subs from the box made sure connections were good ( they were) Checked the LOC all working fine. So does any one have an idea what the problem could be. [/QUOTE]

Verification