Reply to thread

Message: <blockquote data-quote="fly_marlin" data-source="post: 8278013" data-attributes="member: 660781">You can do a separate ground for each amp, will save you from having to buy yet another distribution block. You should really take a look at the chart I linked to above. Unless your power run is super long, you should be able to use a 300A fuse. Once you have determined that a given wire guage is sufficient for your current needs, you can forget the equipment - at this point you're protecting the wire. Here's a link to the fuse and you can get an inline fuse holder from them as well:<a href="http://www.knukonceptz.com/mobile-audio/fuses/anl-fuse/sp/silver-plated-300-amp-anl-fuse/" target="_blank">Silver Plated 300 Amp ANL Fuse - Merchandise</a>When you say 4gauge to sub - is that in regard to speaker wire? If so, you can just use the same size as for speakers. That or 10guage.</blockquote>

Top