Reply to thread

Message

<blockquote data-quote="TheRealSpinner" data-source="post: 8528420" data-attributes="member: 670870">OK, so I&#039;ve been doing more research, and planning...Right now, I&#039;m pretty set on the Pioneer AVH-4200NEX Head Unit.Planning my wiring diagram, it seems like I&#039;ll be able to run one set of RCAs from the head unit through the PAR 245, then through the DEQ-230 into the first PC4100.&nbsp; I can run both front and rear channels off the one input, and set crossovers inside the amp.&nbsp; I&#039;ll set the front crossovers to High-Pass 200-300 Hz range, and the rears I will also run High-Pass, but probably at 70-80 Hz range, and then put a capacitor in line to cut out the frequencies that the coaxials are playing.&nbsp; The way the PC4100 amp works, the RCA output is crossed-over opposite of the &quot;rear&quot; speaker output.&nbsp; Since I will have the 8&quot; midbass running off of the &quot;rear&quot; output, high-pass, the output of the RCAs will be low-pass.&nbsp; Those RCAs will feed my second PC4100 and run a pair of 12&quot; subs from there.Now I just need to find some 8&quot; midbass speakers and decide on 12&quot; subs.As far as 8&quot; midbass speakers, I realize that I could also find some 2 ohm drivers and give them 200 watts a piece...Also, planning on running a pair of JL 12w3v3.Thoughts?<a href="http://s988.photobucket.com/user/TheRealSpinner/media/Mibile%20Audio/Stereo%20Setup%20Version%201_zpsggvvqy2b.jpg.html" target="_blank"><img src="http://i988.photobucket.com/albums/af9/TheRealSpinner/Mibile%20Audio/Stereo%20Setup%20Version%201_zpsggvvqy2b.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></a></blockquote>

[QUOTE="TheRealSpinner, post: 8528420, member: 670870"] OK, so I've been doing more research, and planning... Right now, I'm pretty set on the Pioneer AVH-4200NEX Head Unit. Planning my wiring diagram, it seems like I'll be able to run one set of RCAs from the head unit through the PAR 245, then through the DEQ-230 into the first PC4100. I can run both front and rear channels off the one input, and set crossovers inside the amp. I'll set the front crossovers to High-Pass 200-300 Hz range, and the rears I will also run High-Pass, but probably at 70-80 Hz range, and then put a capacitor in line to cut out the frequencies that the coaxials are playing. The way the PC4100 amp works, the RCA output is crossed-over opposite of the "rear" speaker output. Since I will have the 8" midbass running off of the "rear" output, high-pass, the output of the RCAs will be low-pass. Those RCAs will feed my second PC4100 and run a pair of 12" subs from there. Now I just need to find some 8" midbass speakers and decide on 12" subs. As far as 8" midbass speakers, I realize that I could also find some 2 ohm drivers and give them 200 watts a piece... Also, planning on running a pair of JL 12w3v3. Thoughts? [URL="http://s988.photobucket.com/user/TheRealSpinner/media/Mibile%20Audio/Stereo%20Setup%20Version%201_zpsggvvqy2b.jpg.html"][IMG]http://i988.photobucket.com/albums/af9/TheRealSpinner/Mibile%20Audio/Stereo%20Setup%20Version%201_zpsggvvqy2b.jpg[/IMG][/URL] [/QUOTE]

Verification