Reply to thread

Message

<blockquote data-quote="JakeM" data-source="post: 1003191" data-attributes="member: 561797">First of all I dont get wtfSqrt(Power*Resistance) = Voltagemeans. So im hoping you guys can help me.Sub Amp-Clarion DPX 1000.2Putting 2 RE 12 (4ohm DVC) this is how im going to wire them<img src="http://www.rockfordfosgate.com/rftech/wiringwizard/2_4ohmDVC_4ohm.gif" alt="" class="fr-fic fr-dii fr-draggable " style="" />My amp is250x2 into 4ohms450x2 into 2ohms1000x1 into 2ohmsSo if I wire the subs like I showed you and bridged it to the amp I would get about 500 to both subs or 250 to each, right?Ok also how many volts(using that formula above) would I need to set my gain to?Also should I switch the amp to Mono?Ok now that thats over I just got in my Clarion APX 200.2 and PG ZR 6.5 CompsPG=4 ohms eachClarion=50x2 @ 4ohmsSo how would I do that dam formula?Sqrt(Power*Resistance) = VoltageSqrt(50*4) = 14.142735Am I Right?</blockquote>

[QUOTE="JakeM, post: 1003191, member: 561797"] First of all I dont get wtf Sqrt(Power*Resistance) = Voltage means. So im hoping you guys can help me. Sub Amp-Clarion DPX 1000.2 Putting 2 RE 12 (4ohm DVC) this is how im going to wire them [IMG]http://www.rockfordfosgate.com/rftech/wiringwizard/2_4ohmDVC_4ohm.gif[/IMG] My amp is 250x2 into 4ohms 450x2 into 2ohms 1000x1 into 2ohms So if I wire the subs like I showed you and bridged it to the amp I would get about 500 to both subs or 250 to each, right? Ok also how many volts(using that formula above) would I need to set my gain to? Also should I switch the amp to Mono? Ok now that thats over I just got in my Clarion APX 200.2 and PG ZR 6.5 Comps PG=4 ohms each Clarion=50x2 @ 4ohms So how would I do that dam formula? Sqrt(Power*Resistance) = Voltage Sqrt(50*4) = 14.142735 Am I Right? [/QUOTE]

Verification