Reply to thread

Message

<blockquote data-quote="theCybe" data-source="post: 1636471" data-attributes="member: 558105">//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif&nbsp; I will send you some pictures at my earliest convenience. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gifUnder the back seatcushions there are some bolts;&nbsp; Pull &#039;em.&nbsp; Seat comes UP and out.&nbsp; That&#039;ll get you from the cabin to the trunk.Along the passenger side rear there is some trim;&nbsp; With the back seats out you can pop it up, I&#039;d suggest a pair of flathead screwdrivers.&nbsp; Poke around until you find the clips, and get on either side.Same for the front, you&#039;ll need to wedge the trimpiece on the passenger front side under the dash open to feed your powerwire around and underneath the carpet.I&#039;ll send a pic of the firewall hole I used.The headunit comes out but first the center console needs to be pulled;&nbsp; There are screws on either side, a little below your knees if you&#039;re in the seat.Mine didn&#039;t have any, but it looks like there might be plastic snap-on covers where the screws are.Metra makes a mounting plate that&#039;ll fit fine.The RCA and Remote lines can be fished through the console trim / carpet with a coathanger.The trunk is easy enough, shouldn&#039;t have any trouble disassembling that.</blockquote>

[QUOTE="theCybe, post: 1636471, member: 558105"] [IMG]//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif[/IMG] I will send you some pictures at my earliest convenience. [IMG]//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif[/IMG] Under the back seatcushions there are some bolts; Pull 'em. Seat comes UP and out. That'll get you from the cabin to the trunk. Along the passenger side rear there is some trim; With the back seats out you can pop it up, I'd suggest a pair of flathead screwdrivers. Poke around until you find the clips, and get on either side. Same for the front, you'll need to wedge the trimpiece on the passenger front side under the dash open to feed your powerwire around and underneath the carpet. I'll send a pic of the firewall hole I used. The headunit comes out but first the center console needs to be pulled; There are screws on either side, a little below your knees if you're in the seat. Mine didn't have any, but it looks like there might be plastic snap-on covers where the screws are. Metra makes a mounting plate that'll fit fine. The RCA and Remote lines can be fished through the console trim / carpet with a coathanger. The trunk is easy enough, shouldn't have any trouble disassembling that. [/QUOTE]

Verification